yrros
Member
Member #: 6587 Posts 1
Registered: 8-5-2007 Member Is Offline Mood:
|
| posted on 24-5-2007 at 12:05 |
|
|
Old Windsurf part needed can anyone help?
HI there, i am new to windsurfing and i got a board sail etc for very little, keen to try it out but i need the bit which joins the
board to the mast.
The board is a 'highfly 330 fx' i cant find any reference to them online at all so its real old.
Any one got any ideas?
Many thanks
Anthony
www.westwaleskayaking.co.uk
|
|
|
justal
|
| posted on 24-5-2007 at 12:55 |
|
|
Can you post a photo of the mast track on the board?... (The bit that the mast will attach to on the board.)
Some older boards had proprietory fittings and you will need a particular deck plate to fit it... More modern boards (including my
Hifly 265 RX which will be a similar age to your Hifly) has a simple fin box style mast track into which any standard deck plate will
fit.
Al.
URL: Pixelwave Design - Website Design Wales
Shop: Website Templates
Personal Weblog: A Simple Life of Luxury in West Wales
|
|
|
Angusj
Grommet 
Member #: 1470 Posts 14
Registered: 5-9-2005 Location: North Uist, Outer Hebrides Member Is Offline Mood: Ah yes..always good...
|
| posted on 9-6-2007 at 09:45 |
|
|
I had the same problem with an ancient board a few years ago. I think I called a place called Dave Knoble watersports or something like
that. They built a new mast foot from old parts they had..
Angus
|
|
|
force7
Member
Member #: 6694 Posts 1
Registered: 14-6-2007 Member Is Offline Mood:
|
| posted on 14-6-2007 at 14:53 |
|
|
There are two different tracks used on that board depending on age, I am sure if you send a picture to Dave Nobles they will be able to
help you. Their e-mail is info@nobleboards.co.uk
|
|
|
adam
|
| posted on 11-7-2007 at 17:57 |
|
|
If you're still looking and it isn't a std base try Boardwise as they have an unbelievable amount of gear inc old parts (unless they've
had a clearout since I was last there!)
|
|
|
Pixelwave Web Design.
justal@forces-of-nature.co.uk